Top 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Top 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Blog Article

Do not undervalue the forklift at work. If the operation is not good, there will certainly be significant crashes in mins, and there are several accidents involving forklifts.

Case 1: The forklift cargo blocked the chauffeur's sight, and the person in front could not be found, resulting in a rolling mishap.
Situation 2: In order to maintain the balance of the forklift when lifting hefty items, the staff members utilized their body weight as the weight, which nearly triggered casualties.
Situation 3: The width of the forklift cargo exceeds the allowed size of the path and hangs on the roadside shelf, which almost creates an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Instance 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the workers illegally, the forklift driver does not put on the safety belt, the forklift lifter falls and the driver is squashed when the forklift rolls over.
Case 7: The forklift vehicle driver did not use a seat belt and dropped from the automobile when it rolled over and was crushed.
Forklift procedure ought to take note of these issues ：.

Begin.
1. Before beginning, observe the surroundings, and after validating that there are no challenges that hinder the safety and security of driving, honk the horn initially and after that begin.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before beginning.
3. When the forklift starts with a lots, the chauffeur should initially confirm that the load is secure and reputable.
4. The start needs to be slow and consistent.

Driving.
1. When driving, the height between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the pole should be tilted in reverse. .
2. Do not lift the fork expensive when driving. When entering and leaving the task website or while driving, be careful that there will be no barriers in the sky. When the tons is taking a trip, the fork must not be increased too expensive, which will certainly affect the stability of the forklift. .
3. After dumping, the fork should be reduced to the regular driving placement before driving. .
4. When turning, if there are pedestrians or lorries nearby, the driving signal ought to be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will create the lorry to lose lateral stability and tip over. .
5. When the forklift is downhill, it is purely restricted to switch off the flame and slide, and it is restricted to brake unexpectedly while driving with lots unless there are unique circumstances.
6. When the forklift is running, it should follow the website traffic rules in the manufacturing facility and have to maintain a certain safety distance from the vehicle in front. .
7. When the forklift is running, the load should be in the lowest setting that does not impede the driving, and the gantry ought to be appropriately tilted back. The tons shall not be raised except when stacking or filling. .
8. The elevation of the lots have to not obstruct the motorist's view. In special situations, when the product impacts the forward vision, drive at a low speed when turning around.
9. It is restricted to activate the ramp, neither to drive across the ramp. .
10. The safe driving speed of the forklift in the manufacturing facility location is 5 km/h, and it needs to drive safely at a low rate when getting in the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is restricted for workers to stand on the fork to hold items and play a stabilizing function. .
12. If issues are found, they will certainly be fixed and reported in a timely manner, and they will certainly never operate with ailments or hide them.

packing and unloading.
1. When fork-loading things, the distance between both forks ought to be adjusted as required to make the tons of both forks well balanced and not skewed, and one side of the thing must be against the shelf. .
2. It is prohibited to collaborate with a single fork or make use of a fork top or draw. In special situations, safety and security indication need to be set up to remind surrounding pedestrians. .
3. In the process of loading and discharging items, the forklift must be braked with the brake. .
4. The speed of the automobile must be slow and steady. Take care not to roll the wheels on the dunnage, so as not to extend the rolled things and harm individuals. .
5. When utilizing a fork to fork the goods, the fork ought to be as deep as feasible under the lots, and it must be kept in mind that the fork tip need to not touch various other goods or things. The load ought to be maintained with minimal back tilt of the gantry to ensure that the lots does not slide backwards. The mast can be slanted forward slightly when the tons is Stand-on Electric Pallet Stacker reduced to enable simple placement of the load and extraction of the forks. .
6. It is prohibited to fork goods at broadband and hit difficult things with the fork head. .
7. When the forklift is functioning, it is restricted for people to loaf the fork, so as to avoid the collapse of the goods and injure people. .
8. Straining is banned, and it is restricted to utilize forks to raise employees to participate in high-altitude operations to prevent high-altitude falling accidents. .
9. It is not enabled to use the brake inertia to slip, place, round or roll things. .
10. It is not allowed to use forks to pick, transform pallet dump.

Leaving .
1. It is prohibited to leave the forklift when the things on the fork are in the air. Before leaving the forklift, you have to unload the goods or reduced the fork framework.
2. Draw the hand brake deal with to dead or depress the hand brake switch.
3. The engine is turned off and the power is cut off. (Except for unique conditions, such as the driver does not leave the automobile's line of sight and does not surpass 1 minute).
4. Eliminate the trick. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look ought to be examined, and fuel, lubricating oil and air conditioning water must be added.
2. Check the security performance of starting, running and braking.
3. Examine whether the lights and horn signals are full and efficient.
4. During the operation of the forklift, examine whether the stress and temperature level are typical.
5. After the forklift is running, the outside leak needs to likewise be inspected and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the automobile;.
2. When you encounter somebody in front of you throughout driving, you should send a Stand-on Electric Pallet Stacker signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the low point of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The transforming should not be too sharp to avoid the propensity of " complimentary turning";.
6. Adding and down the slope should be slow and consistent, and no turning on the slope is allowed.
7. Do not drive throughout the slope. When the gradient is more than 10%, the automobile should be driven backwards when worsening;.
8. When the forklift personnel lug the goods and move on, if they experience large or heavy items and most likely to the chauffeur's line of vision, they must take the reversing exercise
.
The "Eight Prohibitions" should be followed in the procedure.
1. Single fork operation is not allowed.
2. It is not permitted to raise the goods for long distance driving.
3. It is not allowed to get the goods by turning over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not enabled to use inertia pressure to pick up the goods.
6. It is not enabled to utilize stopping pressure to expatriation round or easy-to-roll objects.
7. It is not allowed to bring individuals to service the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Parking is not allowed under the following problems.
1. Curves, slim roadways, railway crossings;.
2. Areas with a longitudinal slope greater than 5%.
3. When there is an barrier on one side of the road, the contrary side of the area with the same size as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844